Download TWRP Recovery for Redmi Note 4X

0/5 No votes

Report this app


A working build of TWRP for Redmi Note 4X is now available to download. This is a step-by-step guide that explains how to install TWRP on Redmi Note 4X.

This Redmi Note 4X TWRP is brought to you by the official developer.

TWRP Redmi Note 4X



If you like the work the developer(s) then do consider for a contribution to  TWRP project:
Donate to dees_troy TWRP’s Lead developer

Installing TWRP recovery on Redmi Note 4X requires an unlock bootloader, which may void the warranty and delete all data on your phone. Make sure you back up important data.

You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you. So, flash at your own risk!

About this TWRP for Redmi Note 4X

– TWRP version: 3.3.1-0
– Device Codename: mido
– Supported Android Version: Android 10

Currently Supports Android 10 but soon you will get to see the Android 11 support when the stable API releases.

What’s Not Working?

Everything is working.

Where to download TWRP for Redmi Note 4X?

Below is a list of files or guides required to install or flash TWRP recovery on Redmi Note 4X. The next section has a step by step guide that explains when and how to use these files or guides in the process.
  • Redmi Note 4X, USB cable and a Windows, or Linux or MAC with ADB and fastboot installed on it.
  • TWRP for Redmi Note 4X –
  • ADB and Fastboot utility.- 15 Seconds ADB Installer for Windows
    Minimal ADB and Fastboot for Windows
    ADB Fastboot for Linux and MAC
  • Unlocked bootloader on Redmi Note 4X

How to Install TWRP on Redmi Note 4X?

Installing TWRP on the phone requires an unlock bootloader. So, I have divided this whole guide into two parts as below:

  1. Bootloader Unlock
  2. Flashing the TWRP

Flashing or Booting the TWRP

  1. Download the TWRP recovery for Redmi Note 4X.
  2. Download and Install the ADB and Fastboot utilities.
  3. Then connect the phone to the PC using a USB cable.
    – On your phone, if you see such as “Allow USB debugging” then just tap on OK to proceed.
  4. On the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and execute the below command to restart your phone into fastboot mode or bootloader mode:
    adb reboot bootloader
    – You can also enter into fastboot or bootloader mode by turning off the phone and then pressing the Power button + Volume Down button.
  5. As this is an A-only device, the TWRP needs to be flashed on the recovery partition. So, execute one of the following command as per the requirement:
    Execute below command to flash the TWRP permanently:
    fastboot flash recovery twrp-3.4.x-xx.img
    Execute below command to boot the TWRP temporarily:
    fastboot boot recovery twrp-3.4.x-xx.img
    While executing this command make sure to replace the twrp-3.4.x-xx.img with the actual filename of the TWRP.
  6. Wait for the fastboot command to finish installing the TWRP on Redmi Note 4X.

That’s all on installing TWRP on Redmi Note 4X. For some reason, if it fails, you can login and reply below so that I can try to help you troubleshoot the issue.

After installing TWRP on Redmi Note 4X

You can do many things after installing TWRP on Redmi Note 4X. Below are few such examples:

  • You can enable Root on Redmi Note 4X
  • You can install one of the custom ROMs available for Redmi Note 4X
  • You can install some of the mods, magisk modules, etc.

Add-on links for Redmi Note 4X

Following are some extra resources for Redmi Note 4X which you may be interested in:
– LineageOS 17.1 for Redmi Note 4X
– GCam for Redmi Note 4X

Visit the following to get other updates of Redmi Note 4X (codename: Mido) on Android Custom ROMs, LineageOS ROMs, and all other device specific topics.

Leave a Reply

Your email address will not be published. Required fields are marked *