Red Wolf Recovery [RWRP] TWRP for Redmi 3s/Prime (Land)

The latest Red Wolf Recovery[RWRP] TWRP for Redmi 3s/Prime (Land) is now available to download from an unofficial build.

On this Red Wolf Recovery[RWRP] recovery guide, you will find the Red Wolf Recovery TWRP Download for Redmi 3s/Prime (Land) and a step by step guide to update/install Red Wolf Recovery[RWRP] Redmi 3s/Prime (Land).

This Red Wolf Recovery For Redmi 3s/Prime (Land) is built by  Devil7DK

DONATION TO PROJECT/DEVELOPER(s):

If you like this ROM then do consider for a small contribution to  Devil7DK and TWRP project:
Donate To  Devil7DK

DISCLAIMER:
Make sure that your phone is not Unlocked
INSTALLING red wolf recovery [RWRP] TWRP ON Redmi 3s/Prime (Land) MAY BRICK AND ERASE ALL THE DATA ON YOUR PHONE DURING THE PROCESS.
Before proceeding further you may consider backup all data on the phone.
You are the only person making changes to your phone and I cannot be held responsible for the mistakes done by you.

 

 

INFORMATION OF THIS RED WOLF TWRP FOR Redmi 3s/Prime (Land):

– Red Wolf the upgraded Version of TWRP for Redmi 3s/Prime (Land).
– Supported Android Version: Unknown
– Custom ROM supported: AOSP based Android ROMs

Redmi 3s/Prime (Land) RED WOLF RECOVERY TWRP DOWNLOAD, OTHER REQUIRED DOWNLOADS AND GUIDES:

 

What to do after you install Red Wolf TWRP for Redmi 3s/Prime (Land):

Now your Samsung Galaxy A6 is installed with the TWRP recovery and you may disconnect your phone. Here are some more guides using the TWRP recovery:

Well, this isn’t it. You can install customized themes, sound mods, Xposed modules etc. after installing the Red WOlf TWRP on Redmi 3s/Prime (Land).

HOW TO INSTALL RED WOLF TWRP RECOVERY ON Redmi 3s/Prime (Land) USING FASTBOOT:

  1. Download the TWRP recovery image to be installed on your Android. Make sure that the TWRP recovery is meant for your Android device ONLY.
  2. Enable USB Debugging under Developer Options. If you don’t know how to do this then here is How to Enable Developer Options and How to Enable USB Debugging under Developer Options.
  3. Install ADB and Fastboot utility on your PC or MAC. Follow the appropriate guide to install Fastboot according to the OS that you use:
    -The 15 seconds adb installer and the minimal adb fastboot installer for Windows
    ADB Fastboot Installation guide for Linux and MAC.
  4. Go to the directory where you have downloaded the TWRP image file and then open the command console or termianl on this directory on your PC. To open a command window on Windows OS in the current directory, press shift + Right Click anywhere on Windows explorer, or some folder. Then on the menu opened, just press the “w” key on the keyboard or select “Open command window here” to open a command window.
  5. Now connect your Android to the PC using a USB cable.
  6. Enter the following command on the command window opened:
    adb reboot bootloader

    to put your Android into bootloader mode where you can flash/install the TWRP recovery.
    If your Android device asks permission such as “Allow USB debugging” then just tap on OK to proceed.

  7. Now when your Android is on the bootloader mode just execute the following command on the console:
    fastboot flash recovery twrp-3.0.x.x-xxx.img

    While executing this command make sure to replace the twrp-3.0.x.x-xxx.img with the actual file name of the TWRP that you have downloaded for your Android.

  8. Wait for the TWRP to be flashed. Once it is done execute the following command:
    fastboot reboot

    on the command console and VOILA, your Android is now installed with TWRP recovery.

After executing all above steps in order, your Android will have the TWRP installed. If you want some more TWRP guides, like: how to wipe data or other partitions using TWRP or how to take backup using TWRP then the following links will help you:
How to wipe Android partitions using TWRP
How to take NANDROID backup using TWRP

If you have any concerns while installing TWRP on your Android then just login and reply back on this thread to get instant help.

How to flash Supersu zip on Redmi 3s/Prime (Land) using Red Wolf TWRP recovery:

  1. Restart the Redmi 3s/Prime (Land) to boot into Red WOlf TWRP recovery.
  2. You need to decrypt the /data partition on the Redmi 3s/Prime (Land)- Go to Wipe>Format Data and follow the on-screen instructions.
  3. When /data partition is wiped, go the Red Wolf TWRP home screen and reboot into Red Wolf TWRP recovery.
    – This time the /data partition would be mounted by Red Wolf TWRP. [THIS IS IMPORTANT]
  4. Now download and copy the no-verity-opt-encrypt.zip and RMM bypass.zip file to Redmi 3s/Prime (Land). (You can download the files from this downloads section)
  5. Then, Select the Install from TWRP home screen, then select the no-verity-opt-encrypt.zip file and RMM bypass zip file from the file browser.
  6. Flash or install both the zip file on Redmi 3s/Prime (Land), by Sliding the Swipe to Confirm Flash on Red Wolf TWRP screen.Here is a screenshot how to flash the SuperSU ROOT (you replace with RMM patch) for Redmi 3s/Prime (Land) via Red Wolf TWRP:
    Flash RMM bypass zip for Galaxy A6 using TWRP
  7. Wait for TWRP to flash the no-verity-opt-encrypt.zip file and RMM bypass zip file on Redmi 3s/Prime (Land). Once the flashing is done just reboot your device.
  8. Profit!!! You should now have a fully featured Red Wolf TWRP on Redmi 3s/Prime (Land).

If you face any problems on this guide to install Red Wolf TWRP for Redmi 3s/Prime (Land) then, you can login and reply here. Either me or some other user on this forum will revert back to your query as soon as possible.

Stay tuned or Subscribe to the Redmi 3s/Prime (Land) forum For other Android Custom ROMs, LineageOS ROMs, and all other device specific topics.

 

Leave a Comment