- July 9, 2016 at 1:56 PM #4810
Samsung Galaxy S7 Edge SM-G935F devices are getting official Android 6.0.1 Marshmallow update. Here is a very simple Step By Step guide to update the Marshmallow Update Manually on the Samsung Galaxy S7 Edge SM-G935F (Netherlands, Vodafone). Just grab the Firmware update using the SamFirm utility or SamMobile or Samsung-Updates website as provided in the below section and then follow the manual OTA update process to get the latest Marshmallow update.DISCLAIMER:
Manually updating the firmware will WIPE EVERYTHING on your phone. Make sure you do a backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself. I am not at all responsible if anything happens to your phone as a consequence of following this guide but I can assure you that I will help you as far as possible to get you out of the problem (if something happens).
For more Custom ROMs, TWRP Recovery Installation guide, Rooting Guide you can have a look at the Galaxy S7 Edge forum and also you can subscribe to stay updated for this device specific topics.
INSTALLING THE Samsung Galaxy S7 Edge SM-G935F (Netherlands, Vodafone) Android 6.0.1 MARSHMALLOW OTA UPDATE:
- Download and install the Samsung drivers for your phone.
- Download and install the ODIN application on your PC before proceeding further.
- Download the latest Marshmallow OTA update from Samsung Servers using the SamFirm Firmware Samsung Stock Firmware download utility using the following guide:
– Here I have compiled a guide explaining How To Download Stock Samsung Firmware easily and Quickly Using SamFirm.
- After downloading the OTA update install the stock OTA update using the ODIN application using the following guide:
– Here is the Samsung Stock Firmware Flashing guide Using ODIN.
DONE!!! Your phone will now be booting into the Latest Samsung Galaxy S7 Edge SM-G935F (Netherlands, Vodafone) Android 6.0.1 MARSHMALLOW Update. If you have any concerns while following this update then just login to comment. Till the next update just stay tuned.
You must be logged in to reply to this topic.