- July 19, 2017 at 3:33 AM #23978OrkoMember
I tried install TWRP form both odin and CWM recovery and also installed them. But after installing while I try to either boot in recovery or reboot system, it seems like a starting screen come up
and my phone got stuck their I just cant do anything else, actually its the whole problem I am facing no matter what I do I finally end up here. Now I have to enter in download mode and using odin flash CWM got to flash again as nothing else is working, please help me solving my problem.July 19, 2017 at 12:48 PM #23979shibaa987ParticipantSeptember 11, 2017 at 9:41 AM #25212jli008Member
我用ODIN正常的刷了,也顯示完成REBOOT,但按了音量向上+HOME+開關出來都是一個死了的機械人圖案……November 27, 2017 at 3:56 PM #29611spiekMember
If after successfully installing TWRP phone goes back to standard recovery mode try this:
“Before you flash the recovery, untick the Auto Reboot option in ODIN. Then flash the recovery. After flashing in done, reboot your device directly to recovery mode from download mode by pressing Vol up + Power + Home button together. Now you will see the TWRP recovery is booted in your device. Now you can reboot normally and your TWRP will be installed.”
worked for meApril 19, 2019 at 4:46 PM #80444Luis CarvalhoParticipant
Hi, could you help me. is giving this error.
my model is samsung s7 edge SM-G935A
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 23 M
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
- You must be logged in to reply to this topic.