Galaxy S7 Australia (SM-G930F) Marshmallow OTA Update Manually

GCam Port | Google Camera APK v9.2 (March 2024) Forums Samsung Device Forums Galaxy S7 Exynos – G930F Galaxy S7 Australia (SM-G930F) Marshmallow OTA Update Manually

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #5400
    Linux User
    Participant

    Samsung Galaxy S7 Australia (SM-G930F) devices are getting official Android 6.0.1 Marshmallow update version G930FXXU1APGH. Here is a very simple Step By Step guide to update the G930FXXU1APGH 6.0.1 Marshmallow Update Manually on the Samsung Galaxy S7 Australia (SM-G930F) (Exynos). Just grab the Firmware update using the SamFirm utility as explained in the below section and then follow the manual OTA update process to get the latest update.

    Before downloading the OTA and update the same manually, you should check if the OTA is available for your device or not.
    To check for the OTA Update, Go to Settings -> About Phone -> Software Update -> Check for Update

     

    DISCLAIMER:
    Manually updating the firmware will WIPE EVERYTHING on your phone. Make sure you do a backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself. I am not at all responsible if anything happens to your phone as a consequence of following this guide but I can assure you that I will help you as far as possible to get you out of the problem (if something happens).

     

    Samsung Galaxy S7 Australia SM-G930F (Exynos) MARSHMALLOW OTA

    REQUIRED DOWNLOADS AND RELEVANT LINKS TO UPDATE GALAXY S7 SM-G930F (Australia):

     

    INSTALLING THE Samsung Galaxy S7 Australia (SM-G930F) (Exynos) G930FXXU1APGH Android 6.0.1 MARSHMALLOW UPDATE:

    1. Download and install the Samsung drivers for your phone.
    2. Download and install the ODIN application on your PC before proceeding further.
    3. Take backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself.
    4. Download the latest Marshmallow OTA update from Samsung Servers using the SamFirm Firmware Samsung Stock Firmware download utility using the following guide:
      – Here I have compiled a guide explaining How To Download Stock Samsung Firmware easily and Quickly Using SamFirm.
    5. After downloading the OTA update install the stock OTA update using the ODIN application using the following guide:
      – Here is the Samsung Stock Firmware Flashing guide Using ODIN.

    DONE!!! Your phone will now be booting into the Latest Samsung Galaxy S7 Australia (SM-G930F) Android 6.0.1 MARSHMALLOW Update. If you have any concerns while following this update then just login to comment. Till the next update just stay tuned.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.