• July 2019
 

Download Stock Firmware G532GDDU1ARG2 for Galaxy J2 Prime

4.3
03

CyanogenMod ROM Forums Samsung Device Forums Galaxy J2 ACE / Prime – SM-G532x Download Stock Firmware G532GDDU1ARG2 for Galaxy J2 Prime

This topic contains 4 replies, has 5 voices, and was last updated by  uggr 3 months, 2 weeks ago.

 
 
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #46195

    shibaa987
    Participant

    Stock firmware file G532GDDU1ARG2 for Galaxy J2 Prime is now available to download. Here is a very simple Step By Step guide to to install G532GDDU1ARG2 Stock Fimrware file on Galaxy J2 Prime (SM-G532G).

    The G532GDDU1ARG2 stock firmware file has to be downloaded using SamFirm software or third party website aopl’s provided in the below section and then follow the manual update guide using the ODIN software to update Galaxy J2 Prime.
     

    Download Stock Firmware G532GDDU1ARG2 for Galaxy J2 Prime

    Before downloading the Samsung Stock Fimrware File and update the same manually, you should check if the firmware OTA is already available for Galaxy J2 Prime or not.
    To check for the OTA Update, Go to Settings -> About Phone -> Software Update -> Check for Update

     

    DISCLAIMER:
    – Manually updating the firmware will DELETE EVERYTHING on Galaxy J2 Prime.
    – Make sure you do a backup of your phone or backup using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP.
    – I am not at all responsible if anything happens to your phone as a consequence of following this guide but I can assure you that I will help you as far as possible to get you out of the problem (if something happens).

    Galaxy J2 Prime (SM-G532G) Oreo 8.1 G532GDDU1ARG2 Stock Firmware Details:

    • Supported Device: Galaxy J2 Prime
    • Supported Model Numbers: SM-G532G
    • Android OS version: Android Oreo 8.0
    • Region of availability: Sri Lanka
    • Firmware Build Number: G532GDDU1ARG2
    • Firmware Update Type: Official Full-OTA
    • File Size: 1.3 GB

    REQUIRED DOWNLOADS AND LINKS TO UPDATE Samsung Galaxy J2 Prime to G532GDDU1ARG2:

     

    How to Install Galaxy J2 Prime G532GDDU1ARG2 Stock Firmware file using ODIN:

    1. Download and install the Samsung drivers for your phone.
    2. Download and install the Samsung ODIN application on your Windows PC before you proceed further.
    3. Take backup of your Android phone or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP.
    4. Download the latest G532GDDU1ARG2 Stock Firmware file for Galaxy J2 Prime (SM-G532G), using the SamFirm software (Samsung Stock Firmware download utility) using the following guide:

      Download Samsung Stock Firmware Using SamFirm.
      – Or you can download the OTA updates from third party website links I have linked above.

    5. After downloading the stock firmware update install it using the ODIN application:

    If you have successfully flashed the stock firmware file, then your phone would now be booting into the Latest G532GDDU1ARG2 Galaxy J2 Prime firmware update.

    If you have any concerns while following this update then just login to comment. Till the next update just stay tuned.

    Stay tuned or Subscribe to the Galaxy J2 Prime (SM-G532G) forum for recovery, rooting, custom ROM guides etc. and all other device specific topics.

    #54987

    Umar Faruk
    Member

    That is a good solution. I hope it work on my phone. Iwill try it a.s.a.p

    #61147

    Anonymous

    Is it compatible with sm-g532f, too?

     

    #71927

    siba
    Keymaster

    I think SM-G532F might have a different firmware.
    If you want that stock firmware I can find out for you.

    #78086

    uggr
    Participant

    If you can find out SM-G532F rom for me, i will be grateful you. Thanks for a lot.

     

 
 
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

   
Loading...