Download and Install Mediatek USB VCOM Driver on Windows 10

  

LineageOS ROMs Forums Mediatek Development Forum Mediatek Development Download and Install Mediatek USB VCOM Driver on Windows 10

This topic contains 0 replies, has 1 voice, and was last updated by  shibaa987 1 month ago.

 
 
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #44176

    shibaa987
    Keymaster

    If you are a Mediatek phone user and want to install recovery or root or install stock firmware on Mediatek phone then you must have to use the SP Flash tool. SP Flash tool will not recognize a Mediatek phone connected to a Windows 10 PC unless WIndows 10 Mediatel USB VCOM Drivers are installed.

    I have created this post because people have been asking how to install Mediatek USB VCOM drivers on a Windows 10 PC. Make sure you go through the guide complete to be able to install the Mediatek VCOM driver auto installer.

    Download and Install Mediatek USB VCOM Driver on Windows 10

    Mediatek VCOM USB Driver Download for Windows 10 and Compatibility Information:

    How to Install Mediatek VCOM USB Driver on Windows 10:

    1. First Download Mediatek VCOM USB Driver and extract the downloaded package.
    2.  

    3. Now, open Device Manager on your Windows 10 PC. You can open device manager in various ways
      1. Click Windows button + Pause Break to open windows properties screen. Form there you click on the Device Manager on the top left side of the screen.
        select Device Manager
      2.  

      3. Or Right Click on My computer then click on Manage. On the next screen that opens click on Device Manager which is on the left side.
        open manage
        select dev manager
      4.  

    4.  

    5. On the device manager page, click on Action toolbar button and then click on Add Legacy Hardware.
      add legacy hardware on windows 10
    6.  

    7. On the next screen that appears, just click on Next.
      click next
    8.  

    9. On the next screen select the Install the hardware that I select manually from a list (Advanced) and then click on Next.
      install hardware manually
    10.  

    11. Next screen appears with a list of devices. Just click on Next and move ahead.
      click next and proceed
    12.  

    13. On the next screen select Have Disk.
      click on have disk
    14.  

    15. A pop up window will appear. Click on Browse.
      click on browse
    16.  

    17. Locate the Mediatek Driver folder where that you have extracted. Based on The Windows OS, select the Windows 10 x86 MTK USB Drivers.inf file and click on Open.
      Select Mediatek USB VCOM inf file for Windows 10
    18.  

    19. On the next screen click on OK.
      click OK
    20.  

    21. On the next screen you will see various drivers. Select the MediaTek PreLoader USB VCOM Port to install and click Next.
      select mediatek preloader USB VCOM driver
    22.  

    23. On the next screen verify which driver you are installing (in our case it is MediaTek USB VCOM driver) and then click on Next.
      verify mediatek USB VCOM driver and click next
    24.  

    25. On the next screen just read the status of Mediatek VCOM driver installation and click on Finish.

    That’s all. After successfully installing the Mediatek USB VCOM driver you can now use SP flash tool to either install a recovery or install Mediatek Firmware etc.

    If you still face any problem installing the Mediatek USB VCOM driver on Windows 10 version after following this guide, then you leave a reply here and I will assist you as soon as possible.

    Stay tuned or Subscribe or visit the Mediatek Development forum for other Mediatek related topics and hacks.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.