Download & Install Galaxy Tab P1000 CM13 Marshmallow ROM

GCam Port | Google Camera APK v9.2 (March 2024) Forums Samsung Device Forums Galaxy TAB P1000 – p1 Download & Install Galaxy Tab P1000 CM13 Marshmallow ROM

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #3838
    Linux User
    Participant

    Galaxy Tab P1000 CM13 Marshmallow ROM has been arrived which is brought to you by developer frhatfrat. If you are flashing CyanogenMod for the first time then please be aware that this MAY VOID WARRANTY of your phone and may permanently damage your phone. This Galaxy Tab P1000 CM 13 CyanogenMod Marshmallow ROM is for Galaxy TAB p1000 and hence make sure on which you are flashing.

    DISCLAIMER:
    Installing Custom ROM requires your phone to be UNLOCKED in some cases which may VOID WARRANTY. Sometimes if not handled carefully then it may permanently damage your phone and prevent from BOOT. Understand that you are the only person making changes to the device. In case of any damage or any kind of loss as a consequence of this installation, Neither the Developer nor We can be held responsible.

     

    Galaxy Tab P1000 CM13 CyanogenMod 13 Marshmallow ROM

    Required Downloads and Links for Galaxy Tab P1000 CM13 unofficial ROM flashing:

    Root binary is inbuilt since CyanogenMod 12, so you don’t need a separate SuperSu package to install to gain ROOT access. Here is How to Enable ROOT Access on CM13/CyanogenMod 13

    Flashing Galaxy Tab P1000 CM13 CyanogenMod 13 Marshmallow ROM:

    1. Follow this if you are flashing CyanogenMod 13 for the first time to your Galaxy Tab P1000, or coming from another ROM:

      • Download and Copy the GApps and CyanogenMod ROM ZIP to your device.
      • Boot into Recovery. Make sure to have a Custom recovery like CWM or TWRP.
        If you don’t have a recovery then download it from the above link and follow the beolw guide to flash:
        How to Install TWRP on Samsung using Odin for the .tar TWRP file.
      • Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition. Here is a guide explaining how to wipe data using TWRP recovery.
      • First flash the CM ROM ZIP from device. Then flash the GApps zip from your device memory.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
        Use the same guide to flash the GApps too.
      • Reboot and Enjoy the CyanogenMod 13 Marshmallow ROM on your Galaxy Tab P1000.
    2. This will delete all your data on your phone. You may consider backing up your phone data or take a nandroid backup. Here is how to take NANDROID backup using TWRP recovery.

      Points to NOTE:
      – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
      – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
      – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    3. Upgrading from earlier version of CyanogenMod 13.0:

    The first boot may take long time, so don’t panic and be sure that you have enough battery backup. Let the phone reboot and then enjoy the official CyanogenMod 13 Marshmallow ROM on Galaxy Tab P1000.

    After this CM13 installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT Access on CM13/CyanogenMod 13.

    #5642
    Linux User
    Participant

    This ROM is the best so far for P1000 except that it is very limiting in terms of app use of user data. I think the problem is /data/data is mounted on mtdblock2 instead of the primary mmcblock0 where /data is mounted. The users of this ROM is limited to around 400mb of user app data. I tested to move the app into external sdcard but data still resides in mtdblock2. I hope this issue will be addressed on the next build. thanks.

    #7347
    Linux User
    Participant

    +Ben Trance
    Is this an official ROM from CM? Anyway,now I’m using OMNI based MARSHMALLOW.This has so many bugs.So I have decided to shift to this ROM.Seems working god.What’s your opinion? What are the other bugs.?
    Thanks in advance !!
    Pls Reply !!!

    #7348
    Linux User
    Participant

    +Ben Trance
    Is this an official ROM from CM? Anyway,now I’m using OMNI based MARSHMALLOW.This has so many bugs.So I have decided to shift to this ROM.Seems working good.What’s your opinion? What are the other bugs.?
    Thanks in advance !!
    Pls Reply !!!

    #18316
    Linux User
    Participant

    First of all, thanks for this firmware. I have a lovely GT-P100N (latin model) with humberos Android 5.1.2 a bit slow but ok.

    No sucess, with this cm13 firmware. I downgraded to gingerbread and reinstalled from clockwork 3.x (not TWRP as announced) and finally What I get is a TWRP after reboot no touch screen.

    Your help will be appreciated.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.