CyanogenMod 13 for UMI Super CM13 (CyanogenMod 13) Marshmallow ROM

GCam Port | Google Camera APK v9.2 (March 2024) Forums UMIDIGI Device Forums Super CyanogenMod 13 for UMI Super CM13 (CyanogenMod 13) Marshmallow ROM

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5631
    Linux User
    Participant

    UMI Super CM13 (CyanogenMod 13) Marshmallow Custom ROM is an UNOFFICIAL Android Marshmallow build for UMI Super. In addition to this we also have the Lineage OS 13 for UMI Super. This UMI Super CM13 (CyanogenMod 13) ROM is brought to you by developer flo071, another ROM by primo3 and another is developed by joe2k01, Rometheus, Flounderist, Deepflex. Current status of this ROM is UNKNOWN. It is strongly recommended that you take either a NANDROID backup or take a complete sync of your phone data.

    DISCLAIMER:
    Installing custom ROM requires a custom recovery to be installed on your device, which in-turn may require the bootloader to be unlocked which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup your all data. You are the only person making changes on your phone and neither we nor the developer can be held responsible for the mistakes done by YOU.

     

    CYANOGENMOD 13 FOR UMI SUPER CM13 (CYANOGENMOD 13) MARSHMALLOW CUSTOM ROM

     

    WORKING LIST for the ROM by joe2k01 and members:
    – Camera(Front & Back, better zoom than BETA1)
    – Bluetooth & WiFi
    – Vibration
    – Flashlight
    – Rotation
    – GPS(High Accuracy & Battery Saving) (GPS does not work on Device Only mode)
    – FM Radio
    – Fingerprint Scanner
    – USB Tethering (WiFi tethering does not working and so, no WiFi hotspot)

     

    KNOWN ISSUES:
    – Audio services force close 2 times

     

    REQUIRED DOWNLOADS AND GUIDES FOR UMI SUPER CM13 ROM FLASHING:

    The CyanogenMod 13 ROM for UMI Super comes with inbuilt ROOT, so SuperSU zip file is not required. After this CM13 installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT Access on CM13/CyanogenMod 13

     

    CYANOGENMOD 13 FOR UMI SUPER CM13 (CYANOGENMOD 13) MARSHMALLOW CUSTOM ROM INSTALLATION GUIDE:

    Make sure that you have a custom recovery installed on your UMI Super. If not then download the recovery from above downloads section and you can follow this How to Install TWRP on a mediatek device guide.

    Points to NOTE on Backup:
    – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
    – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
    – It is also discouraged to Restoring Apps + Data using Titanium Backup.

    1. Follow this if you are flashing CyanogenMod 13 ROM for the first time to your UMI Super phone, or coming from another ROM:

      • Download and Copy the GApps and UMI Super CyanogenMod 13 ROM ZIP to your phone.
      • Boot into Recovery. Make sure to have a Custom recovery like CWM or TWRP or any other custom recovery.
      • Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition.
        – Here is a guide explaining how to wipe data using TWRP recovery.

        This will delete all your data on your phone. IGNORE IF YOU DON’T WANT TO OR IF YOU HAVE ALREADY DONE THIS. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM.
        How to backup all data on your Android Device.
        how to take NANDROID backup using TWRP recovery.

      • First flash the CM13 ROM ZIP from device. Then flash the GApps zip from your device memory.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
        – Use the same guide to flash the GApps too.
      • Reboot and Enjoy the CyanogenMod 13 Marshmallow ROM on your UMI Super.
    2. Upgrading from earlier version of CyanogenMod 13 ROM on UMI Super:

      • Copy the latest UMI Super CyanogenMod 13 ROM ZIP file to your phone.
      • Boot into Recovery.
      • Flash the latest CM ROM ZIP from your phone.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
        – Use the same guide to flash the GApps too.
      • Reboot and Enjoy

    Complete the initial setup and enjoy Android Marshmallow 6.0 with CyanogenMod 13 for UMI Super. After this CyanogenMod 13 ROM installation you may want to enable ROOT access on your phone and here is how you can do that:
    How to Enable ROOT Access on CM13/CyanogenMod 13

    Stay tuned or Subscribe to the UMI Super forum For upcoming Android Nougat ROMs, CyanogenMod Custom ROMs, other ROMs and all other device specific topics.

     

    #6517
    Linux User
    Participant

    And is it possible to configure indekator events and switching between virtual and normal buttons?

    #6680
    Linux User
    Participant

    I don’t know if CyanogenMod has any settings to switch between Virtual and Normal keys !!!
    You need to check the same in settings.

    #9505
    Linux User
    Participant

    It’s a long time ago i change rom in a phone but after buy a Umi Super it’s nesesery again.
    Now i have try many time with rome below and folow described but have some problem.
    TWRP Recovery don’t work! In boot mode wite TWRP Recovery screen don’t work! If i press in one place its press in another, all screen its crazy.
    After try many TWRP recovery files from different sites i found someone who work and finally can start flash new rom.
    I follow all steps for change to CM13 and all work fine (but even gapps file below dont work) but after reboot it’s the screen similar I described earlier! Touch screen don’t work, It’s not press where i want!
    It’s not possible do something!
    Trying many time with Rom from different makers.
    Only way it’s flash back orginal UMI Rom again.
    What i doing wrong?
    Hope I write in right plase, beginner on this forum :-)

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.